光纤色散测量概述

介绍了三种最为成熟的光纤色散测量方法:时延法、相移法和干涉法,并从色散测量原理、测量装置、适用范围以及优缺点等几方面进行了论述.时延法测量精度不高,目前较少采用;相移法测量精度高,但测量仪器价格昂贵,测量成本高;干涉法既能满足一定的测量精度要求(时间分辨率可达1ps),又控制了测量成本,是普遍采用的测量方法.     

生存能力技术及其实现案例研究

生存能力技术谋求增强系统在面临攻击、失效等灾难情况下仍能继续提供服务的能力。本文提出了以多样化分布式动态备份技术和主动漂移机制为手段，以被保护目标的机动性和隐蔽性为目的的生存能力技术模型。提出了多样化体系理论及其实现案例，基于该理论设计并实现了自适应TOM方法。最后通过模拟和测试探讨了生存能力的评价方法，并验证了本文的结果。     

Logistic模型的改进及在油藏可采储量预测中的应用

为了更准确地预测油气藏未来的经济可采储量，依据油气藏随开发必然要经历产量递减和生产收支平衡的实际。利用Logistic模型中技术可采储量、产量与时间的相互关系，经推导和改进后，再结合当前经济技术条件下的废弃产油量，预测油气藏的有效生产时间及其经济可呆储量。实践证实，改进后的Logistic模型预测结果更符合油气藏的生产实际，能为油气藏的储量管理提供可靠的依据。     

电荷耦合器件积分时间对微型成像系统成像质量的影响

在光圈固定的情况下，确定合适的积分时间对于提高微型电荷耦合器件(CCD)成像系统的成像质量，增强微型飞行器的侦察能力具有十分重要的意义。本文讨论了决定CCD积分时间的各种因素，重点研究了适用于微型飞行器的CCD成像系统的积分时间与像移的关系，并进一步推导了计算像移量的相关数学模型。利用该模型对不同积分时间内采集的运动图像进行了像质评价，结果表明，在保证曝光量的前提下，当像移量被限制在1个像素内时，可以获得相对理想的运动图像像质。     

海拉尔盆地的古河道砂体识别方法

本文基于海拉尔盆地贝尔凹陷西北部高精度三维地震资料,通过对时间域、频率域地震属性的分析,研究了河道砂体的变化及分布规律,总结出了一套利用时间域、频率域地震属性识别古河道的方法。其中对河道砂体较为敏感的沿层属性主要有均方根振幅、反射强度梯度、有效带宽及瞬时频度等。利用这种识别方法在该区找到水下分流河道砂体和河口坝砂体,为该区的岩性勘探部署提供了具体目标。     

目标RCS动态数据的分布特征研究

复杂目标在不同视向的RCS分布特征是不同的，传统模型对此都没有给出详细的结果。文中以某歼击机和直升机为对象，应用X^2。分布、对数正态分布和瑞利分布模型，以及Kolmogomv拟合优度检验方法，研究其RCS动态测量数据的统计分布特征，得到了在一定显著性水平下，两种目标在不同视向角下对三种模型的拟合效果，同时得到应用X^2。分布拟合时模型半自由度随视向角的分布情况。在显著性水平为0．05时，对于在较短时间内录得的复杂目标动态RCS数据，应用X^2分布可以取得较好的拟合效果。文中结果精确地描述了目标RCS的起伏特征，能够为目标回波的精确模拟与检测提供可靠的依据。     

300km/h高速铁路PC槽型梁动力试验研究

介绍北方交通大学与比利时鲁汶大学、布鲁塞尔自由大学、比利时铁路公司合作,在巴黎至布鲁塞尔之间高速铁路线上的Antoing大桥进行的二次高速铁路桥梁动力试验。试验桥梁由跨度50m的多跨预应力混凝土简支槽型梁构成,试验中列车速度达265-310km/h。通过现场试验和实验结果分析,得到了桥梁的频率、振型、阻尼等自振特性,以及桥梁在高速列车作用下的动挠度、梁和桥墩的横向和竖向加速度、橡胶支座的相对位移、梁体的动应变等动力响应特性。试验经验和测试结果对于充实高速铁路桥梁动力分析理论、改进数值分析模型、验证计算结果、提高高速铁路桥梁的动力设计水平、保证行车安全,具有重要的意义。     

Characterization of the Residence Time Distribution in Spray Dryers

In this work it is presented a study on the residence time distribution (RTD) of particles in a co-current pilot-plant spray dryer operated with a rotary atomization system. A nuclear technique is applied to investigate the RTD responses of spray dryers. The methodology is based on the injection of a radioisotope tracer in the feed stream followed by the monitoring of its concentration at the outlet stream. The experiments were performed during the drying of aqueous suspensions of gadolinium oxide. The RTD responses obtained experimentally presented good reproducibility, indicating that the technique applied is well suited to investigating fluid-dynamics of spray dryers. In addition to the experimental investigation, a mathematical model was used to describe the RTD experimental curves.     

A three-dimensional FE analysis of large deformations for impact loadings using tetrahedral elements

 A three-dimensional dynamic program for the anaysis of large deformations in contact-penetration problems is developed using the finite element Lagrangian method with explicit time integration. By incorporating a tetrahedral element, which allows a single-point integration without a special hourglass control scheme, this program can be more effective to the present problem. The position code algorithm is used to search contact surface. Eroding surfaces are also considered. The defense node algorithm was slightly modified for the calculation of contact forces. A study of obliquity effects on metallic plate perforation and ricochet processes in thin plates impacted by a sphere was conducted. It is well simulated that on separation of two parts of the sphere, the portion still within the crater tends to perforate, while the portion in contact with the plate surface ricochets. This deformation pattern is observed in experiments, especially at high obliquities. A long rod that impacts an oblique steel plate at high impact velocity was also simulated in order to study the dynamics of the rod caused by the three dimensional asymmetric contact. The agreement between simulated and experimental results is quite good. Fracture phenomena occuring at high obliquity deserves further investigations. Received: 20 February 2002 / Accepted: 20 September 2002     

Analysis and simulations of vibrations of a beam with a slider

A model for vibrations of a beam with a slider is derived, analysed and numerically simulated. It describes a viscoelastic beam that is clamped at one end to a vibrating device, while the other end moves between two stops attached to a slider. The contact is described by the normal compliance or by the Signorini conditions. The existence of weak solutions is established using the theory of set-valued pseudomonotone operators. The model is discretized using fourth-order spatial discretization, the solutions are numerically simulated and their results presented. The dynamics of the vibrations are depicted and so are the noise characteristics of the system.